Product category
    2020 Tebis Open House

    We were looking forward to hosting our popular industry event on June 24 and 25. Our motto "We bring it all together" is not suitable during the current pandemic, and unfortunately, we had to cancel the Tebis Open House this year. However, we still plan to host certain things online, so you'll hardly miss anything. Let us surprise you!

    INTERMOLD Nagoya

    The Exhibition has been postponed indefinitely

    AEROSPACE & Defense Meetings
    Data : 09/09/2020 - 11/09/2020
    Onde estamos : Sevilla | Espanha


    DMS Nagoya
    Data : 09/09/2020 - 11/09/2020
    Onde estamos : Aichi | Japão


    IMTS 2020
    Data : 14/09/2020 - 19/09/2020
    Onde estamos : Chicago | EUA

    Booth: 133230


    The Exhibition is canceled

    Data : 22/09/2020 - 24/09/2020
    Onde estamos : Kielce | Poland


    MATEK eurasia
    Data : 28/09/2020 - 03/10/2020
    Onde estamos : Istanbul | Turquia


    MSV Brno
    Data : 05/10/2020 - 09/10/2020
    Onde estamos : Brünn | República Checa

    BVV Hall A

    SIMTOS 2020
    Data : 05/10/2020 - 09/10/2020
    Onde estamos : Goyang | Coreia do Sul

    SIMTOS has been postponed.
    Alternative date is October 5 - 9, 2020

    Booth 02C970

    Data : 06/10/2020 - 08/10/2020
    Onde estamos : Caxias do Sul | Brasil


    Open house
    Data : 08/10/2020 - 08/10/2020
    Onde estamos : Caxias do Sul | Brasil


    Data : 13/10/2020 - 17/10/2020
    Onde estamos : Friedrichshafen | Alemanha

    Hall: B2
    Booth: B2-2125

    Data : 14/10/2020 - 17/10/2020
    Onde estamos : Mailand | Itália


    Data : 29/10/2020 - 31/10/2020
    Onde estamos : Parma | Itália


    Data : 23/11/2020 - 27/11/2020
    Onde estamos : Bilbao | Espanha

    The 31 edition of BIEMH is postponed to november 2020

    MACH 2020
    Data : 25/01/2021 - 28/01/2021
    Onde estamos : Birmingham | Reino Unido 

    MACH Exhibition rescheduled to January 2021.
    Given the spread of the Coronavirus, the MTA has decided that, in order to minimise the risks to visitors and exhibitors, it is rescheduling the event 25-28 January 2021. The event will still be held, in the same Halls, at the NEC.

    Data : 16/03/2021 - 19/03/2021
    Onde estamos : Lyon | França

    The Exhibition has been postponed to march 2021

    Metav 2020
    Data : 23/03/2021 - 26/03/2021
    Onde estamos : Düsseldorf | Alemanha

    METAV 2020 – International trade fair for technologies in metal manufacturing, scheduled to take place from March 10 – 13 in Düsseldorf, Germany, has been postponed

    Data : 24/05/2021 - 28/05/2021
    Onde estamos : Moskau | Rússia

    The Exhibition has been postponed to may 2021

    Data : 15/06/2021 - 18/06/2021
    Onde estamos : Lyon | França

    The Exhibition has been postponed to june 2021

    ELMIA Verktygsmaskiner
    Data : 10/05/2022 - 13/05/2022
    Onde estamos : Jönköping | Suécia

    The ELMIA has been postponed to May 2022

    Maior rapidez e eficiência com fresas de segmento circular
    Data : 03/06/2020 - 03/06/2020
    Onde estamos : Online, Webinar | Webinar

    Hora: 9:00 às 10:00
    Quais as melhores combinações entre ferramentas e estratégias para conseguir acabamentos e pré-acabamentos mais eficientes?
    Paulo Almeida, Process Optimizer da Moldino, e Valter Santos, Técnico CAD/CAM da Tebis, irão responder a todas as suas questões relacionadas com esta temática.

    Setup processes for single-part manufacturing

    Successful survival in the current market is determined by expertise in manufacturing engineering. Organizations must consider their production capacity, throughput times and flexibility in order to supply their customers on time.

    Personnel management and increasing efficiency

    Demands at the middle management level are high. This area requires that responsible personnel not only have technical expertise, but also a combination of entrepreneurial thinking and social responsibility.

    Project management basics

    The faster markets change and the more complex customer requirements become, the more important solid project management is for small and medium-sized companies. Only those who can process orders as efficiently as possible can remain competitive in the long run.

    Tebis process

    Insight into the Tebis process concept for managers and decision makers: We highlight the possibilities for creating processes in the company more effective and productive, for example with the Tebis process solution.

    Industry 4.0

    Industry 4.0 offers small to medium-sized companies the opportunity to improve their processes and thus react more flexibly to individual customer requests. Productivity and profitability can be increased with Industry 4.0.

    Focus on management

    This seminar is intended for managing directors and manager of medium-sized companies: Many different factors determine whether a company is successful or not. The relationship between management and personnel and personnel motivation deserve special attention.

    Tebis Base

    Participants in this basic training course get to know Tebis software. The user interface and handling of CAD data and importing external data via interfaces will be learned. 

    CAM Base

    In this basic CAM training course, participants will learn basic functions in the Tebis Job Manager in order to create, check, output and document roughing, finishing and residual stock NC paths, simple prismatic machining operations and simple drilling programs.

    CAM Milling and Drilling Plus

    Supplementing the "CAM Base" training course, participants will learn additional functions for form machining (3+2 axis milling, HSC milling), prismatic machining (2.5D milling) and for machining standard geometries (bores, circular, slot and rectangular pockets).

    Feature Design and Rigid NCSet Methods

    This course is intended to train Tebis users how to work with features (manufacturing information) and NCSets (machining sequences).