Menu

Press review

Tebis in the press

Learn what the press says about us. This will take you to an overview of all articles about Tebis.

Search options

  • Tebis Appoints New Business Development Manager for Canada

    Tebis Appoints New Business Development Manager for Canada

    Jeff Nesbitt will primarily focus on developing CAD/CAM software business in the Ontario market.

    Released:
    fabricatingandmetalworking.com, 06/20/2017
    Business:
    All
    Category:
    Report
    To article
  • Automating NC Programming Helps Speed Machining Processes, Improves Part Quality

    Automating NC Programming Helps Speed Machining Processes, Improves Part Quality

    Manufacturing Engineering: What’s new for Tebis in CAD/CAM software?

    Released:
    advancedmanufacturing.org, 05/09/2017
    Business:
    All
    Category:
    Report
    To article
  • New Sales Management at Tebis America

    New Sales Management at Tebis America

    John Kowalczyk is the new senior manager of Global Strategic Accounts and Mark Cadogan is their vice president of sales for North America.

    Released:
    www.fabricatingandmetalworking.com, 04/22/2017
    Business:
    All
    Category:
    Report
    To article
  • Optimize Processes in Model, Mold and Die Production

    Optimize Processes in Model, Mold and Die Production

    The Version 4.0 software release from Tebis America is especially well suited to machining parts with steep cavities and using high performance cutters on hard materials.

    Released:
    www.fabricatingandmetalworking.com 01.08.2016
    Business:
    All
    Category:
    Story
    To article
  • CAD/CAM Increases Milling Efficiency in Roughing and Extends Tool Life

    CAD/CAM Increases Milling Efficiency in Roughing and Extends Tool Life

    Version 4.0 Release 2 CAD/CAM software from Tebis is especially well-suited for rough machining of deep cavities and hard material.

    Released:
    www.fabricatingandmetalworking.com 29.07.2016
    Business:
    All
    Category:
    Story
    To article
  • Tebis America announces launch of Version 4.0 Release 2 CAD/CAM software

    Tebis America announces launch of Version 4.0 Release 2 CAD/CAM software

    This new launch is especially well-suited to the rough machining of deep cavities and is effective for hard material machining as well.

    Released:
    Manufacturing Tomorrow
    Business:
    All
    Category:
    Report
    To article
  • Tebis Version 4.0 with improved user interface

    Tebis Version 4.0 with improved user interface

    Version 4.0: The developers have expanded the automation process for NC programming. Element features enable planar surfaces, contours, vertical surfaces, and complex pockets to be described. (German only)

    Released:
    FORM + Werkzeug, 4/18-2015
    Business:
    All
    Category:
    Story
    To article
  • Far-sighted solutions

    Far-sighted solutions

    The highest quality standard in all divisions has long been the core benefit at HAUK Modell- und Formenbau GmbH in Landsberg am Lech. In addition to creating a strong innovative culture, this also results in long-term collaborative customer relationships. The extremely high degree of customization they offer also continues to opening up new markets, winning over customers from a wide range of sectors. (German only)

    Released:
    PresseBox, 3/24-2015
    Business:
    Modelling
    Category:
    Story
    To article
  • Increased machine run time

    Increased machine run time

    Theoretically, machines can work productively for 8,400 hours per year. Tebis in Martinsried has evaluated data from more than 100 industry participants and determined that, on an annual average, their machines are working productively only 30 percent of the time. (German only)

    Released:
    PLASTVERARBEITER, 3/2-2015
    Business:
    All
    Category:
    Story
    To article
  • New company takes up residence in West Göppingen

    New company takes up residence in West Göppingen

    The Tebis Group has opened its new office on Stuttgarter-Strasse. It offers technical information systems and process solutions. (German only)

    Released:
    Südwest Presse, 3/20-2015
    Business:
    All
    Category:
    Report
    To article
  • New user interface for Tebis

    New user interface for Tebis

    The process supplier for optimal manufacturing processes in model, mold and die fabrication, and mechanical engineering has reworked and modernized its CAD/CAM software interface without sacrificing its tried and proven features. (German only)

    Released:
    Zerspanungstechnik.de, 2/06-2015
    Business:
    All
    Category:
    Report
    To article
  • Rib and slot machining made easy

    Rib and slot machining made easy

    Tebis has harmonized CAD and CAM functions in a sophisticated concept for rib and slot machining. A powerful analysis function automatically detects the component segments that are potentially appropriate for rib and slot machining. The practical Tebis planning functions are highly beneficial. They automatically divide the geometry into appropriate machining areas such as base, flank and radii. This optimally prepares for the subsequent roughing and finishing processes. (German only)

    Released:
    PresseBox, 2/5-2015
    Business:
    Tooling
    Category:
    Story
    To article
  • Simple is better

    Simple is better

    HBW-Gubesch in Emskirchen relies on a comprehensive analysis from Tebis Consulting to fully exploit the potential in its manufacturing processes. Their success is evident: In their electrode process alone, the company is now saving 120 hours per week, with the potential for greater savings. The throughput is faster, and the quality is higher.

    Released:
    Reprint from werkzeug & formenbau, February 2015
    Business:
    Mould
    Category:
    Success story
  • Euromold 2014: Tebis presents the interface of the future

    Euromold 2014: Tebis presents the interface of the future

    Tebis AG from Martinsried near Munich presented its redesigned user interface for the first time at the Euromold World Fair in Frankfurt, Germany, November 25-28, 2014. The process supplier for optimal manufacturing processes in model, mold and die fabrication, and mechanical engineering has reworked and modernized its CAD/CAM software interface without sacrificing its tried and proven features. (German only)

    Released:
    PresseBox, 12/5-2015
    Business:
    All
    Category:
    Story
    To article
  • Tebis 3.5 for manufacturing

    Tebis 3.5 for manufacturing

    Last month, Al Dean took a look at the tools inside Tebis to assist with design. This month, he concludes with a look at what Tebis has for those looking to take those parts into production using a variety of methods.

    Released:
    DEVELOP 3D. 11/17-2014
    Business:
    Automobile
    Category:
    Story
    To article
  • Doing what others cannot

    Doing what others cannot

    Proto-Technik Gesellschaft für Gestaltung technischer Produkte mbH, specializing in prototypes, design check models, checking and cutting templates as well as Meisterbock gauges, protects its customers’ future products: Only those with verified authorization are permitted to tread the company's hallowed halls. The company has unveiled a few secrets for Tebis. Plus: The collaboration success story is ongoing.

    Released:
    Reprint from NC-Fertigung, November 2014
    Business:
    Modelling
    Category:
    Success story
  • Tebis 3.5 for design

    Tebis 3.5 for design

    Tebis is rare amongst software applications for design, doing things that more mainstream offerings simply do not. Al Dean investigates one of the industry’s best kept secrets and finds a system that has much to offer, now and in the future

    Released:
    DEVELOP 3D. 10/21-2014
    Business:
    Automobile
    Category:
    Story
    To article
  • Peak performance in mold manufacturing

    Peak performance in mold manufacturing

    Peak performance for companies is the goal of Tebis Consulting, a business unit of Tebis AG. Tebis, founded in 1984, is a leading provider of complete software solutions and high-efficiency processes for the development, design and manufacturing of models, molding tools and components. Tebis Consulting Head Jens Lüdke explains the added value, for die and mold manufacturers in particular – and he also promises to create the perfect consulting match to better safeguard investments in other sectors as well.

    Released:
    Reprint from NC-Fertigung, April 2014
    Business:
    All
    Category:
    Report
  • Consistent processes

    Consistent processes

    From a small family business to one of North America's leading mold manufacturers: Hi-Tech Mold has automated repetitive steps along the entire process chain.

    Released:
    Reprint from FORM+Werkzeug February 2014
    Business:
    Mould
    Category:
    Success story
  • Everything from a single source

    Everything from a single source

    If you’re looking for an expert partner who can deliver everything from project planning to the ready-to-ship product, Ansini in Mansfield, Nottinghamshire is exactly right for you. Since its formation in 1992, this plastic vacuum forming manufacturer has provided customized complete solutions for all requirements.

    Released:
    Reprint from DIGITAL ENGINEERING Magazine, 01/2014
    Business:
    Modelling
    Category:
    Success story

Register for the Tebis newsletter and stay up to date.

Services for processes

Consulting

Companies are currently facing new challenges due to deadline pressure, increasingly complex products, rising price pressure and a growing shortage of qualified personnel. Many question whether they are prepared for the future…

Read more

Success story

Heinz Schwarz GmbH & Co. KG – visibly enthusiastic and measurably better

We all like to talk about the golden rules of business success. Some rely on solid data and clear structures, while others prefer to stick with the "gut feeling" of an experienced workforce. Die manufacturer Heinz Schwarz GmbH…

Read more